Guangzhou Toplink hardware Co., Ltd specialized in the production and export of furniture hardware fittings, with an experience of more than 14 years.
Our main products are drawer locks, cabinet hinges, sliding rails, cabinet handles, casters, cabinet legs and connecting fittings etc..
With a complete range of products, excellent performance and reasonable prices we have built up business with many customers all over the world.
We are committed to strict quality control and considerate customer service. We sincerely looking forward to becoming your best choice and the most reliable partner!
Before you even think about turning any screws, you need to find the adjustment points. The location varies dramatically depending on the brand and model of your concealed door closer. Some are accessed through small access panels on the door jamb, often concealed behind decorative trim. Others might require removing the door’s strike plate or even part of the door casing. Consult your door closer's installation manual – this is your most valuable resource. The manual will show you diagrams and highlight the specific adjustment screws for speed, closing force, and latching speed. If you've lost the manual, searching online for your door closer's model number might yield a digital version or helpful images.
Pay close attention to the markings on the adjustment screws themselves. Often, a plus (+) sign indicates increased speed or force, while a minus (-) sign signifies a decrease. Some manufacturers use arrows, or even numbered scales. Carefully examine these markings before making any changes to avoid unintended consequences. Take photos before you start; this will be invaluable if you accidentally make the wrong adjustment.
The closing speed is probably the most frequently adjusted setting. It controls how quickly the door closes during the majority of its travel. A door that closes too quickly can be jarring and even dangerous, especially in high-traffic areas. Conversely, a door that closes too slowly is inconvenient and might not latch securely. The adjustment screw for closing speed is typically labeled "speed," "closing speed," or something similar.
To adjust the closing speed, carefully turn the screw using a small screwdriver. A small turn will make a noticeable difference. Test the door after each adjustment. If the door closes too quickly, turn the screw in the direction indicated by the minus sign (or the appropriate symbol on your closer). If it closes too slowly, turn it in the plus sign direction. Remember, small adjustments are key. It’s better to make several small adjustments than one large one that might overshoot your target.
The latching speed controls the final phase of the door's closure, just before it latches. This is particularly important because a too-fast latch can be noisy and potentially damage the door or frame. Too slow, and the door might not latch properly, leaving it insecure. The adjustment screw for latching speed is usually separate from the closing speed screw.
Similar to adjusting the closing speed, make small incremental adjustments to the latching speed screw. Test the door after each adjustment to ensure the door latches smoothly and quietly without slamming. A well-adjusted latching speed will provide a soft and secure close every time. If the latching is too forceful, adjust the screw accordingly. If it's too slow, the door might not latch at all – in this case, turn the screw in the direction indicated by the plus sign.
The closing force determines how much pressure the door closer applies to pull the door closed. This is often expressed in pounds or a numerical scale on the closer. An incorrect closing force can lead to premature wear and tear on the door, hinges, and the closer itself. A setting that is too strong can damage the door, while a weak setting might allow the door to swing open easily in a breeze or due to traffic.
The adjustment screw for closing force is usually clearly marked, and it often requires a specialized tool or a specific type of screwdriver. Refer to your manual for the correct tool and adjustment procedure. Carefully adjust the force in small increments, testing the door frequently. You’ll want a force setting that closes the door reliably without excessive pressure. Pay attention to how the door feels during its closing cycle – it should be smooth, controlled, and not require excessive effort.
Even with careful adjustments, you might encounter problems. If the door still doesn't close properly, check for obstructions. Something might be interfering with the door's movement, such as a rug, debris, or a poorly adjusted strike plate. Also, inspect the door hinges for looseness or damage. Worn hinges can significantly impact the door's closing performance.
If the problem persists after checking these factors, there might be a deeper issue within the concealed door closer itself. In such cases, it’s best to contact a qualified professional. Trying to repair or replace components yourself without proper training and tools could potentially cause further damage or even void any warranty.
Remember, patience and careful attention to detail are essential when adjusting a concealed door closer. By following these steps and consulting your door closer's manual, you can achieve optimal performance and ensure your doors operate smoothly and securely for many years to come.
INQUIRY